LWIR – Longwave infrared technology based on amourphous silicon microbolometer. Adopting detectors, design of the electronics, video signal, hardware and sofware programing. Production and technical support.
Shutterless uncooled thermal imaging cores – Resolution: 384×288 – 17µm; 640×480 – 17µm; 320×240 – 12µm; 640×480 – 12µm. Thermal core modular system with the number of extension boards: analog/digital video signal; various control interfaces, video/photo data recording.
Thermal imaging devices – handheld thermal devices: monoculars, scopes, clip-on systems, observation units, thermal security cameras, UAV cameras, search and rescue handheld cameras.
Technical service – custom system intergration, custom digital video interface design, analog video signal , OEM services, full project support from starting point to the mass production. Electronic and mechanical design.
VILIR-LH 35 384
Thermal imaging monocular – resolution 384×288; 50Hz, lens: 35mm f/1.0
VILIR-LH 54 640
Thermal imaging monocular – resolution 640×480, 50Hz, lens: 54mm f/1.0
VILIR-LRF 35 640
Themal imaging monocular with laser range finder – resolution 640×480; 50Hz, lens: 35mm f/1.0; Laser range finder – 700 meters.
Custom video signal: Analog/PAL; digital: BT.656, CameraLink, HDMI. Digital video signal on custom specification
Programming service: user software and user interface; custom control interface: UART, RS232, SPI, 2x Quad SPI, USB.
Module system with custom electronic design of conection and interface boards on each and specific project.
Microdisplay adaptation with already approved manufacturers and new solutions.
Adaptation of the new sensors and new thermal imaging technologies: Vanadium Oxide (VOx) and Amorphous Silicon (a-Si).
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 384 x 288 |
| Pixel pitch | 17 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
V i d e o p r o c e s s i n g
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
I n t e r f a c e s
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2,
Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
P h y s i c a l
| Size | 30 mm x 30 mm x 25 mm |
| Weight | 36 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
O p e r a t i o n a l
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 384 x 288 |
| Pixel pitch | 17 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
V i d e o p r o c e s s i n g
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
I n t e r f a c e s
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2,
Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
P h y s i c a l
| Size | 30 mm x 30 mm x 25 mm |
| Weight | 36 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
O p e r a t i o n a l
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 640 x 480 |
| Pixel pitch | 17 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 25 mm |
| Weight | 32 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 640 x 480 |
| Pixel pitch | 17 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 25 mm |
| Weight | 32 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 320 x 240 |
| Pixel pitch | 12 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 18 mm |
| Weight | 25 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 320 x 240 |
| Pixel pitch | 12 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 18 mm |
| Weight | 25 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 384 x 288 |
| Pixel pitch | 17 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 18 mm |
| Weight | 25 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
A S T I R 3 384S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 384 x 288 |
| Pixel pitch | 17 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 18 mm |
| Weight | 25 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 640 x 480 |
| Pixel pitch | 12 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 18 mm |
| Weight | 25 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
S p e c i f i c a t i o n s
| D e t e c t o r | |
| Detector type | Amorphous silicon mircobolometer |
| Resolution | 640 x 480 |
| Pixel pitch | 12 μm |
| NETD | < 55 mK |
| Spectral range | 8 – 14 μm |
| Refresh rate | 50 Hz |
| V i d e o p r o c e s s i n g | |
| Digital zoom | x1, x2, x4, x8, Continious |
| AGC | Advanced analysis of separate scene parts |
| Bad pixel detection/correction | Manual list based, automatic list based, real time |
| Graphics overlay | Pixel based with 256 color palette |
| Offset correction | Fully shutterless |
| Addition offset correction | Residual NUC recording and correction |
| Sharpness adjustment | Yes (variable) |
| Temporal noise filtering | Yes (variable) |
| I n t e r f a c e s | |
| Video output | Analog (PAL); Digital (BT.656, Custom-1, Custom-2, Custom-3, CameraLink) |
| Comunication interface | UART, RS232, SPI, 2 x Quad SPI, USB |
| P h y s i c a l | |
| Size | 30 mm x 30 mm x 18 mm |
| Weight | 25 g |
| Power-up time | < 3.5 s |
| Power suply | 3 – 15 V |
| Mounting holes | 4 x M1.6 (front) and 4 x 2 x M2 (sides) |
| O p e r a t i o n a l | |
| Operating temperature | -40° to +60° |
| Storage temperature | -55° to +105° |
